Coban Guitars

• Electric Guitars DIY Kit ST4 Ash Body Black Pickguard
• Coban Guitars Electric Guitar Kit Includes:
• Chrome fittings
• Fittings Black Pickguard
• Joint: Bolt-on
• Body: Ash Body
• Neck: Maple
• Fingerboard: Ebony with Dot inlays
• Tuning Machines: Chrome Die-cast
• Scale Length: 25.5″ 648mm
• Frets: 22
• 12″ Radius
• 43mm Nut
• NON SOLDERING
• Control: 1V, 2T, 5-Way Selector
• Guitar Bridge System Single Tremolo Guitar Pickup Type Passive
• Guitar Pickup Configuration 3 Single Coil
• Pickups Pickup Selector Switch Type: 5 Ways

• Headstock: Paddle
• Nut: 42mm bone
• Neck: Maple
• Fingerboard: Ebony
• Inlay: Mother of pearl dot inlay
• Radius: 12″
• Frets: Medium Jumbo, 22
• Scale length: 25.5″/648mm
• Body: Ash 1:1 join in the middle
• Veneer: Flame maple on top and back
• Hardware: Chrome
• Pickguard: White
• Electronics: Non soldering
• Control: 1V, 1T, 3-Way Selector
• Pickups: S-S-S Hardware:
• Guitar Bridge System Single Tremolo Guitar Pickup Type Passive
• Instructions

• DIY electric guitar kits
• Coban Guitars Electric Guitar DIY Kit LP744B Flamed Maple Chrome / Black Fittings
• Bolt-On Neck
• Ebony fingerboard
• 22 Frets
• 628mm 24.75″
• 12″ Radius
• Wedge Trapezoid Inlays
• Bone nut 43mm
• Uncut head.
• ALL NON SOLDERING
• Chrome fittings (also available in Gold fittings)
• Pickup: 2 *Humbucker Controls: 2V, 2T PU selector: 3-way switch
• Neck joint: Bolt on
• Inc Black Pick guard.
• Information Please note that the kit does come with basic instructions. Most of the work is straightforward assembly, but you may want to research the web for different assembly techniques and check out youtube for videos on the subject.

• NECK AND BODY ONLY
• Coban Guitars DIY Guitar kit PRSBN Spalted Maple Veneer Set in Neck Body and Neck ONLY
• Mahogany Part Arch Top Body with Spalted Maple Veneer
• NO BINDING ON THE EDGE SEE PHOTOS
• Mahogany Neck Uncut (set-in)
• Ebony Fingerboard
• 22 Frets
• 24.75′ scale 628mm
• Bone nut
• White dot fret markers
• Pre drilled
• Truss Rod

• Coban Guitars DIY Bass Guitar kit FVB Mahogany with Chrome Hardware Black Pickguard Bolt On Neck No Soldering
• Right handed Kit with Solid Mahogany Body
• Chrome fittings
• Fingerboard EBONY
• Bone nut
• Truss rod
• Dot inlays
• Semi cut Head
• Mahogany Neck Bolt on
• Fret: 20
• ALL NON SOLDERING
• Control: 1V, 1T
• Pickups: H-H
• Hardware: CHROME
• Set of strings included
• ***********GREAT IDEAS AND TIPS ON-LINE AND OUR YOUTUBE VIDEOS ON OUR WEBSITE***********

• Guitar Neck ES2 Mahogany Neck
• Headstock: Paddle
• Nut: 42mm bone
• Neck: Mahogany
• Fingerboard: Ebony
• Inlay: Pearloid block
• Radius: 12″
• Frets: Medium Jumbo, 22
• Scale length: 24.75″/628mm
• Neck joint:Set in.
• Call, text or whats app on 07397159810

• Coban Guitars DIY Guitar Kit UK JG1 Flamed Maple Veneer Chrome Hardware No Soldering
• Mahogany Top Body with Flamed Maple Veneer
• Mahogany Neck Uncut (Bolt-on)
• Ebony Fingerboard
• 2x Single Coil cream
• 22 Frets
• Bone nut width 42mm
• String scale length 648mm
• Truss Rod
• Chrome machine heads
• Red scratch plate
• Lead
• Strap buttons
• ALL NON SOLDERING electronics (pots, caps, wires and solder)
• Information Please note that the kit does come with simple instructions. Most of the work is straight forward assembly, but you may want to research the web for different assembly techniques and check out youtube for videos on the subject.This kit contains everything you need to build a complete, playable guitar, except your choice of finish. Call, text or whats app on 07397159810

• Coban Guitars DIY Bass Guitar kit MT1 Mahogany with Chrome Hardware White Pickguard
• Right handed Kit with Solid 2 Piece Mahogany body
• Maple Neck (bolt-on, C profile)
• Chrome fittings
• Fingerboard EBONY
• Bone nut
• Truss rod
• Dot inlays
• Semi cut Head
• 30″ Scale with 19 medium jumbo frets
• JB Bridge and PB Neck Pickups
• ALL NON SOLDERING
• Control: 1 volume and 1 tone knob and 3 way switch in lower cutaway position
• Bass Strings
• Hardware: CHROME
• ***********GREAT IDEAS AND TIPS ON-LINE AND OUR YOUTUBE VIDEOS ON OUR WEBSITE***********

• NECK AND BODY ONLY
• Coban Guitars DIY Guitar kit PRFBN Flamed Maple Maple Veneer Set in Neck Body and Neck ONLY
• Mahogany Part Arch Top Body with Flamed Maple Veneer
• NO BINDING ON BODY
• Mahogany Neck Uncut (set-in)
• Ebony Fingerboard
• 22 Frets
• 24.75′ scale 628mm
• Bone nut
• White dot fret markers
• Pre drilled
• Truss Rod

• Headstock: Paddle
• Nut: 42mm bone
• Neck: Maple
• Fingerboard: Ebony
• Inlay: Mother of pearl dot inlay
• Radius: 12″
• Frets: Medium Jumbo, 22
• Scale length: 25.5″/648mm
• Body: Ash 1:1 join in the middle
• Veneer: Flame maple on top
• Hardware: Chrome
• Pickguard: White
• Electronics: Non soldering
• Control: 1V, 1T, 3-Way Selector
• Pickups: S-S-S Hardware:
• Guitar Bridge System Single Tremolo Guitar Pickup Type Passive
• Instructions

Unleash Your Creativity with the Coban Guitars Electric Guitar DIY Ki

Discover the art of guitar crafting with our Electric Guitar DIY Kit from Coban Guitars. This kit is designed for both novices and seasoned luthiers, offering the freedom to build a unique instrument with a modern twist.

Key Features:

• Headless Design: Embrace innovation with a headless guitar design that combines aesthetics with functionality.
• Ash Body: Crafted from high-quality ash, the body ensures a balance of resonance and lightweight playability.
• Maple Neck: The maple neck provides stability and a bright tone for your musical journey.
• Versatile Fretboard: Enjoy 24 medium jumbo frets, a comfortable 42mm nut width, and a 12″ radius for diverse playing styles.
• Ebony Fingerboard: The ebony fingerboard offers a smooth playing surface with striking new dot inlays and cream binding.
• Pre-Drilled Convenience: Our kit is designed for ease with pre-drilled holes for straightforward assembly.
• Solder-Free Electronics: Benefit from non-soldering components, including sleek black hardware and S.S.H style pickups with a 1V 1T 3W configuration.
• Accessories Included: Your kit comes complete with a lead, strap buttons, and detailed instructions.
• Total Package: This DIY kit contains everything you need to create a complete, playable guitar, except your choice of finish.

Please Note: While the kit includes instructions, assembly techniques can vary. Explore online resources and instructional videos for additional guidance.

Unleash your inner luthier, build your masterpiece, and make music that resonates with your soul. If you have questions or need assistance, feel free to reach out to us at 07397159810 via call, text, or WhatsApp.

It’s time to create music, create memories, and create a guitar that’s uniquely yours with Coban Guitars.

Unleash Your Creativity with the Coban Guitars Electric Guitar DIY Kit

Discover the art of guitar crafting with our Electric Guitar DIY Kit from Coban Guitars. This kit is designed for both novices and seasoned luthiers, offering the freedom to build a unique instrument with a modern twist.

Key Features:

• Headless Design: Embrace innovation with a headless guitar design that combines aesthetics with functionality.
• Ash Body: Crafted from high-quality ash, the body ensures a balance of resonance and lightweight playability.
• Poplar Burl Veneer
• Maple Neck: The maple neck provides stability and a bright tone for your musical journey.
• Versatile Fretboard: Enjoy 24 medium jumbo frets, a comfortable 42mm nut width, and a 12″ radius for diverse playing styles.
• Ebony Fingerboard: The ebony fingerboard offers a smooth playing surface with striking new dot inlays and cream binding.
• Pre-Drilled Convenience: Our kit is designed for ease with pre-drilled holes for straightforward assembly.
• Solder-Free Electronics: Benefit from non-soldering components, including sleek black hardware and S.S.H style pickups with a 1V 1T 3W configuration.
• Accessories Included: Your kit comes complete with a lead, strap buttons, and detailed instructions.
• Total Package: This DIY kit contains everything you need to create a complete, playable guitar, except your choice of finish.

Please Note: While the kit includes instructions, assembly techniques can vary. Explore online resources and instructional videos for additional guidance.

Unleash your inner luthier, build your masterpiece, and make music that resonates with your soul. If you have questions or need assistance, feel free to reach out to us at 07397159810 via call, text, or WhatsApp.

It’s time to create music, create memories, and create a guitar that’s uniquely yours with Coban Guitars.

• Coban Guitars Electric Guitar Kit
• Coban Guitars DIY Guitar kit PR80 Birdseye Maple Veneer Chrome Hardware Set in Neck No Soldering
• No Binding
• Mahogany Neck Uncut (Set-in)
• Ebony Fingerboard
• 22 Frets
• 24.75′ scale 628mm
• 12″ Radius
• Bone nut
• White dot fret markers
• Pre drilled
• Chrome plated hardware
• Control: 1V, 1T, 3-Way Toggle
• Chrome Tailpiece
• Truss Rod
• Chrome machine heads
• Black scratch plate
• Lead
• Strap buttons
• ALL NON SOLDERING electronics (pots, caps, wires and solder)
• Information Please note that the kit does come with simple instructions. Most of the work is straight forward assembly, but you may want to research the web for different assembly techniques and check out youtube for videos on the subject.This kit contains everything you need to build a complete, playable guitar, except your choice of finish. Call, text or whats app on 07397159810

Product Name: Electric Guitar DIY Kit BC1 – Build Your Musical Masterpiece

Unleash Your Inner Luthier with the BC1 Electric Guitar DIY Kit

Key Features:

• High-Quality Ash Body: Crafted from premium Ash wood, known for its exceptional resonance and tonal clarity.
• Chromed Hardware: Chrome-plated hardware components add a touch of elegance while ensuring durability.
• Maple Neck: The bolt-on Maple neck provides stability and a bright, articulate tone.
• Smooth Ebony Fingerboard: The Ebony fingerboard with 22 frets and a 12-inch radius offers a comfortable playing experience.
• Unique Inlays: Stylish dot and razor blade inlays on the fingerboard add a distinctive character to your guitar.
• Precise Bone Nut: A 42mm bone nut enhances sustain and tuning stability for optimal performance.
• Sleek Cut Headstock: The headstock design not only looks great but maintains functionality.
• Dynamic Humbucker Pickups: Equipped with 2 humbucker pickups, the BC1 offers a wide tonal range, perfect for various music genres.
• Effortless Controls: 1T (Tone) and 1V (Volume) controls with a selector switch allow you to fine-tune your sound.
• Locking Bridge Assembly: The kit includes a locking bridge assembly with a Tune-O-Matic for expressive playing.
• Sleek Black Covers: Black hardware covers provide a polished finishing touch to your DIY masterpiece.

These features combine to make the Coban Guitars BC1 Electric Guitar DIY Kit an excellent choice for those looking to create a unique and high-quality instrument.

Everything You Need to Craft Your Dream Guitar:

This kit contains all the components required to build a complete, playable electric guitar. It’s designed for straightforward assembly, making it accessible for both beginners and experienced builders.

Assembly Made Easy:

While the kit includes basic instructions, most of the assembly is user-friendly. For additional guidance, explore various assembly techniques online or watch instructional videos on platforms like YouTube.

Craft your own unique instrument and bring your musical dreams to life with the BC1 Electric Guitar DIY Kit.

Unlock your inner musician with the BCK1 Electric Guitar DIY Kit from Coban Guitars. Featuring an Ash body, Ebony fingerboard, Humbucker pickups, and more. Start your musical journey today!

• Premium Ash Body: Crafted from high-quality Ash wood, known for exceptional resonance and clarity.
• Sleek Black Hardware: Stylish black hardware components add a touch of elegance and durability.
• Smooth Ebony Fingerboard: The Ebony fingerboard with 22 frets, 648mm 25.5″ and a 12-inch radius provides a comfortable playing experience.
• Unique Mother of Pearl Inlays: Stunning dot Mother of Pearl inlays on the fingerboard for added character.
• Precise Black Nut: A 42mm black nut enhances sustain and tuning stability.
• Sleek Cut Headstock: The headstock design combines aesthetics with functionality.
• Dynamic Humbucker Pickups: Equipped with 2 humbucker pickups, offering a versatile tonal range.
• Effortless Controls: 1T (Tone) and 1V (Volume) controls with a selector switch allow fine-tuning of your sound.
• Locking Bridge Assembly: The kit includes a locking bridge assembly with a tremolo arm for expressive playing.
• Black Hardware Covers: Black hardware covers provide a polished finishing touch to your DIY masterpiece.
• Comprehensive Instructions: The kit includes basic instructions, making assembly straightforward for both beginners and experienced builders.

Craft Your Unique Sound with the BCK1 Electric Guitar DIY Kit from Coban Guitars! Featuring premium Ash body, Ebony fingerboard, and versatile Humbucker pickups, this kit allows you to create a one-of-a-kind instrument. Start your musical journey today!

• DIY electric guitar kit By Coban Guitars
• Maple Back
• ALL NON SOLDERING
• Spalted veneer top
• Mahogany neck,
• Square inlays, (The made kit in the photo’s are wedge inlay this is a previous version only)
• Ebony Fingerboard (22 frets) 24.75″ 628mm
• Bone nut 43mm
• Uncut head.
• Truss Rod
• Chrome fittings (Also available in Gold fittings see other listing)
• Pickup 2 Humbucker Controls: 2V, 2T PU selector: 3-way switch
• ALL NON SOLDERING
• WITH BLACK PICK GUARD
• Neck joint Set in.
• Information Please note that the kit does come with basic instructions. Most of the work is straightforward assembly, but you may want to research the web for different assembly techniques and check out You tube for videos on the subject.
• This kit contains everything you need to build a complete, playable guitar, except your choice of finish. Call, text or whats app on 07397159810

• Coban Guitars DIY Electric Guitar Complete Kits
• EXP1 style Right handed Kit with Solid Mahogany Body
• Gold fittings
• Fingerboard EBONY
• Truss rod
• Dot inlays,
• Semi cut head so needs cutting to a shape
• Neck Set in,
• ALL NON SOLDERING
• Tune o metric bridge HH pickups 1 vol 2 tone 3 way switch
• 24.75 scale
• Black pickguard,
• Set of strings included
• ***********GREAT IDEAS AND TIPS ON-LINE AND OUR YOUTUBE VIDEOS ON OUR WEBSITE***********

• Coban Guiatrs DIY electric guitar kits,
• EXP1B style Right handed Kit with Solid Mahogany Body
• Fingerboard EBONY
• Truss rod
• Dot inlays,
• Semi cut head so needs cutting to a shape
• Neck Set in,
• NON SOLDERING
• Chrome fittings
• Tune o metric bridge HH pickups 1 vol 2 tone 3 way switch
• 24.75 scale
• Black pickguard (also available in White see other listings)
• Set of strings included
• ***********GREAT IDEAS AND TIPS ON-LINE AND OUR YOUTUBE VIDEOS ON OUR WEBSITE***********

• DIY electric guitar kits
• LP style Solid Mahogany body with Spalted Maple Veneer
• Ebony fingerboard
• 22 Frets
• 628mm 24.75″
• 12″ Radius
• Wedge Trapezoid Inlays
• Bone nut 43mm
• Uncut head.
• ALL NON SOLDERING
• Chrome fittings (also available in Gold fittings)
• Pickup: 2 *Humbucker Controls: 2V, 2T PU selector: 3-way switch
• Neck joint: Set in
• Inc Black Pick guard.
• Information Please note that the kit does come with basic instructions. Most of the work is straightforward assembly, but you may want to research the web for different assembly techniques and check out youtube for videos on the subject.

• DIY electric guitar kits
• LP style Solid Mahogany body with Spalted Maple Veneer
• Bolt-On Neck
• Ebony fingerboard
• 22 Frets
• 628mm 24.75″
• 12″ Radius
• Wedge Trapezoid Inlays
• Bone nut 43mm
• Uncut head.
• ALL NON SOLDERING
• Chrome fittings (also available in Gold fittings)
• Pickup: 2 *Humbucker Controls: 2V, 2T PU selector: 3-way switch
• Neck joint: Bolt on
• Inc Black Pick guard.
• Information Please note that the kit does come with basic instructions. Most of the work is straightforward assembly, but you may want to research the web for different assembly techniques and check out youtube for videos on the subject.

• Key Product Features
• Premium Mahogany Body: Crafted from high-quality Mahogany wood for exceptional resonance and tone.
• Sleek Chrome Hardware: Stylish chrome-plated components for durability and aesthetics.
• Smooth Ebony Fingerboard: Featuring 22 frets and a comfortable 12″ radius for effortless playability.
• Unique Cloud Inlays: Eye-catching cloud inlays add a touch of character to your guitar.
• Precise Bone Nut: A 43mm bone nut enhances sustain and tuning stability.
• Versatile Pickup Configuration: Equipped with 2 x Humbucker pickups for a wide range of tones.
• Effortless Controls: Features 2 Tone (2T) and 2 Volume (2V) controls with a selector switch for sound customization.
• Durable Chrome Hardware: All hardware components are chromed, ensuring both style and longevity.
• Sleek Black Covers: Black covers provide a polished finishing touch to your DIY masterpiece.
• Comprehensive Instructions: The kit includes basic instructions, making assembly straightforward for all skill levels.

Embark on a musical journey of craftsmanship with the Coban Guitars Electric Guitar DIY Kit LP7M Junior. This kit is an homage to the timeless LP Junior design, offering an exciting DIY experience for enthusiasts of all skill levels.

Features:

• Solid craftsmanship with a Set-in Neck design
• Double-action Truss Rod for precise neck adjustments
• Quality Mahogany Body, 46mm (1.8″) thick, ensuring resonance and durability
• Ebony fingerboard with 22 Frets for smooth playability
• Scale length of 628mm (24.75″) and a comfortable 12″ Radius
• Mother of pearl dot inlays add a touch of elegance
• Bone nut for enhanced sustain and tone
• Semi-cut headstock design for a distinctive look

Electronics:

• 1 Humbucker pickup delivers powerful and versatile tones
• Controls include 1 Volume and 1 Tone for customizable sound shaping

Hardware:

• Chrome Hardware for a sleek and durable finish
• Black covers add a touch of style to the overall design

Note: The kit comes complete with basic instructions, making assembly a straightforward process. However, for additional tips and techniques, consider exploring online resources and YouTube videos that delve into various assembly methods. This DIY kit provides everything you need to create a unique and playable LP Junior-style electric guitar—all that’s missing is your personal touch.

Elevate your guitar-building experience with the Coban Guitars Electric Guitar DIY Kit LP7M Junior. For inquiries or assistance, feel free to reach out.

• Fingerboard EBONY
• Truss rod
• Dot inlays,
• Semi cut head so needs cutting to a shape
• Neck Set in,
• 24.75 scale

• DIY electric guitar kits by Coban Guitars
• LP740 style Solid Mahogany body with Flamed Maple Veneer
• Ebony fingerboard 628mm 24.75″ 12″ Radius
• 22 Frets
• 628mm 24.75″
• 12″ Radius
• Wedge Trapezoid Inlays
• Bone nut 43mm
• Uncut head.
• ALL NON SOLDERING
• Gold fittings (also available in Chrome fittings)
• Pickup: 2 *Humbucker Controls: 2V, 2T PU selector: 3-way switch
• Neck joint: Set in
• Inc Cream Pick guard.
• Information Please note that the kit does come with basic instructions. Most of the work is straightforward assembly, but you may want to research the web for different assembly techniques and check out youtube for videos on the subject.

• Headstock: Paddle
• Nut: 42mm bone
• Neck: Maple + Skunk stripe
• Fingerboard: Maple
• Inlay: Mother of pearl dot inlay
• Radius: 12″
• Frets: Medium Jumbo, 22
• Scale length: 25.5″/648mm
• Body: Ash 1:1 join in the middle
• Veneer: Spalted maple on top and back
• Hardware: Gold
• Pickguard:Red pearl
• Electronics: Non soldering
• Control: 1V, 1T, 3-Way Selector
• Pickups: S-S-S Hardware:
• Guitar Bridge System Single Tremolo Guitar Pickup Type Passive
• Instructions

• Electric Guitar DIY Kit TL6A Semi Hollow F Hole with Ebony Fingerboard Black Pickguard Includes:
• No Drill holes
• Chrome with Big-sby style fittings (No Drill holes)
• Fittings Black Pickguard
• Joint Bolt-on
• White Binding
• Body Great Ash
• Basswood Top
• Neck Maple
• Fingerboard Ebony with Dot inlays
• Bone Nut
• Tuning Machines Chrome Die-cast
• Scale Length 25.5″ 648mm
• Frets 22
• 12″ Radius
• NON SOLDERING
• Control 1V, 1T, 3-Way Selector
• Pickups 2 Humbuckers

• Electric Guitar DIY Kit TL6A Semi Hollow F Hole with Ebony Fingerboard White Pickguard Includes:
• No Drill holes
• Chrome with Big-sby style fittings (No Drill holes)
• Fittings White Pickguard
• Joint Bolt-on
• White Binding
• Body Great Ash
• Basswood Top
• Neck Maple
• Fingerboard Ebony with Dot inlays
• Bone Nut
• Tuning Machines Chrome Die-cast
• Scale Length 25.5″ 648mm
• Frets 22
• 12″ Radius
• NON SOLDERING
• Control 1V, 1T, 3-Way Selector
• Pickups 2 Humbuckers

• DIY electric guitar kits by Coban Guitars
• Body and fittings ONLY
• LP740SQ style Solid Mahogany body with Flamed Maple Veneer (Clearance 22)
• ALL NON SOLDERING
• Chrome fittings
• Pickup: 2 *Humbucker Controls: 2V, 2T PU selector: 3-way switch
• Neck joint: Set in fittings
• Inc Cream Pick guard.
• Information Please note that the kit does come with basic instructions. Most of the work is straightforward assembly, but you may want to research the web for different assembly techniques and check out youtube for videos on the subject.

• DIY electric guitar kit By Coban Guitars
• Maple Back
• ALL NON SOLDERING
• Spalted veneer top
• Mahogany neck,
• Square inlays, (The made kit in the photo’s are wedge inlay this is a previous version only)
• Ebony Fingerboard (22 frets) 24.75″ 628mm
• Bone nut 43mm
• Uncut head.
• Truss Rod
• Chrome fittings (Also available in Gold fittings see other listing)
• Pickup 2 Humbucker Controls: 2V, 2T PU selector: 3-way switch
• ALL NON SOLDERING
• WITH BLACK PICK GUARD
• Neck joint Set in.
• Information Please note that the kit does come with basic instructions. Most of the work is straightforward assembly, but you may want to research the web for different assembly techniques and check out You tube for videos on the subject.
• This kit contains everything you need to build a complete, playable guitar, except your choice of finish. Call, text or whats app on 07397159810

• DIY electric guitar kits
• LP style Solid Mahogany body with Spalted Maple Veneer
• Ebony fingerboard
• 22 Frets
• 628mm 24.75″
• 12″ Radius
• Wedge Trapezoid Inlays
• Bone nut 43mm
• Uncut head.
• ALL NON SOLDERING
• Chrome fittings (also available in Gold fittings)
• Pickup: 2 *Humbucker Controls: 2V, 2T PU selector: 3-way switch
• Neck joint: Set in
• Inc Black Pick guard.
• Information Please note that the kit does come with basic instructions. Most of the work is straightforward assembly, but you may want to research the web for different assembly techniques and check out youtube for videos on the subject.

• DIY electric guitar kits
• LP style Solid Mahogany body with Spalted Maple Veneer
• Bolt-On Neck
• Ebony fingerboard
• 22 Frets
• 628mm 24.75″
• 12″ Radius
• Wedge Trapezoid Inlays
• Bone nut 43mm
• Uncut head.
• ALL NON SOLDERING
• Chrome fittings (also available in Gold fittings)
• Pickup: 2 *Humbucker Controls: 2V, 2T PU selector: 3-way switch
• Neck joint: Bolt on
• Inc Black Pick guard.
• Information Please note that the kit does come with basic instructions. Most of the work is straightforward assembly, but you may want to research the web for different assembly techniques and check out youtube for videos on the subject.

• Unleash Your Creativity with the Coban Guitars Electric Guitar DIY Kit \ Discover the art of guitar crafting with our Electric Guitar DIY Kit from Coban Guitars. This kit is designed for both novices and seasoned luthiers, offering the freedom to build a unique instrument with a modern twist.

• Unleash Your Creativity with the Coban Guitars Electric Semi Hollow Guitar Kit Craft your own musical masterpiece with the Coban Guitars Electric Semi Hollow Guitar Kit. This DIY kit is designed for both beginners and seasoned builders, providing an exciting opportunity to assemble a unique semi-hollow guitar with professional features.Key Features:
• Body Construction: Mahogany Arch Top Body with exquisite Spalted Maple Veneer, delivering a stunning visual appeal.
• Semi Hollow Design: Double F Hole for enhanced resonance and a distinctive aesthetic.
• Neck Construction: Uncut Mahogany Neck with Set-in design for stability and sustain.
• Fingerboard: Ebony with 24 Frets, offering a smooth playing surface and extended tonal range.
• Scale Length: 25.5″ (648mm) and a comfortable 12″ Radius for versatile playability.
• Nut: Bone nut for enhanced sustain and clarity.
• Fret Markers: White dot markers for easy fret identification.
• Pre-Drilled: Simplified assembly with pre-drilled holes for efficient construction.
• Hardware: Chrome Tune-o-matic bridge and tailpiece, Truss Rod, and Chrome machine heads for stability and tuning precision.
• Controls: 1 Volume, 1 Tone, and a 3-Way Toggle for versatile sound shaping.
• Scratch Plate: Stylish Black scratch plate for added visual appeal.
• Electronics: All NON SOLDERING electronics, including pots, caps, wires, and solder.
• Included: Kit comes complete with a lead and strap buttons.

Note: The kit includes straightforward instructions, but for additional insights, explore different assembly techniques online and check YouTube for helpful videos. This all-inclusive kit provides everything you need to build a complete and playable guitar—just add your personal touch with the finish of your choice.

For inquiries or assistance, feel free to call, text, or WhatsApp. 

Elevate your guitar-building experience with the Coban Guitars Electric Semi Hollow Guitar Kit. Craft, play, and make music uniquely yours!

•  For further assistance or inquiries, don’t hesitate to reach out.

  ---

  Please Note: While the kit includes instructions, assembly techniques can vary. Explore online resources and instructional videos for additional guidance. Unleash your inner luthier, build your masterpiece, and make music that resonates with your soul. If you have questions or need assistance, feel free to reach out to us via call, text, or WhatsApp. It’s time to create music, create memories, and create a guitar that’s uniquely yours with Coban Guitars.

Explore DIY Electric Guitar Kits by Coban Guitars – ES266 Spalted Maple, Left-Handed

Unleash your musical creativity with the ES266, a left-handed electric guitar kit designed for the discerning musician in you. This exceptional kit boasts a stunning flamed maple finish, paired with a sleek ebony fingerboard, all accentuated by elegant cream fittings. Crafted with a mahogany and maple 3-ply body, a mahogany neck, and a mesmerizing spalted maple veneer, this guitar promises a harmonious blend of tonal richness and visual allure.

Key Features:

• Mahogany / Maple / Spalted Maple 3-Ply Body: Experience the warmth and richness of mahogany, enhanced by the striking visual appeal of spalted maple.
• Mahogany Neck: A mahogany neck adds to the guitar’s resonance and stability.
• Spalted Maple Finish: The flamed maple veneer brings an elegant touch to your instrument’s aesthetics.
• Ebony Fingerboard: Enjoy smooth playability and exceptional tonal response with an ebony fingerboard.
• 628mm (24.75″) Scale Length: This scale length ensures comfortable play and balanced string tension.
• 12″ Radius: The 12-inch radius fingerboard allows for smooth bending and chord transitions.
• Block Pearlized Inlays: These inlays not only look exquisite but also serve as a functional guide for your fingers.
• Bone Nut (42mm): Enhance sustain and resonance with a precisely cut bone nut.
• Non-Soldering Assembly: Assemble your dream guitar without the need for soldering, making it accessible to all skill levels.
• Chrome Hardware: Chrome fittings add sophistication and durability to your guitar.
• 2 Humbucker Pickups: Enjoy a versatile sonic palette with dual Humbucker pickups, offering a wide range of tones.
• Set-In Neck Joint: The set-in neck joint ensures stability, sustain, and easy access to higher frets.
• Cream Pick Guard Included: Protect and enhance your guitar with the included cream pick guard.

Please note that this kit includes basic instructions to simplify the assembly process. For those seeking additional guidance and inspiration, a wealth of assembly techniques can be explored online, with helpful videos available on platforms like YouTube.

Elevate your music journey with a guitar crafted with care and passion. Experience the ES266 Spalted Maple, Left-Handed guitar kit by Coban Guitars. Order now and embark on your musical adventure!”

• DIY electric Bass kits SE 901 Chrome Hareware.
• Solid 2 Part Ash wood Body With Spalted Maple veneer
• Maple neck,
• Ebony fingerboard 24 Frets
• Bone nut 42mm
• Pickup: 1 x JB 1 x PB Controls: 2V, 1T
• Neck joint: Bolt-on
• ALL NON SOLDERING
• Headstock: Paddle
• Inlay: Mother of pearl dot inlay
• Radius: 12″Scale length: 34″/864mm
• Body: 1:1 Ash
• Veneer: Spalted Maple
• Information Please note that the kit does come with basic instructions Most of the work is straightforward assembly, but you may want to research the web for assembly techniques and check out youtube for videos on the subject.

Explore DIY Electric Guitar Kits by Coban Guitars – ES266 Spalted Maple, Left-Handed

Unleash your musical creativity with the ES266, a left-handed electric guitar kit designed for the discerning musician in you. This exceptional kit boasts a stunning flamed maple finish, paired with a sleek ebony fingerboard, all accentuated by elegant cream fittings. Crafted with a mahogany and maple 3-ply body, a mahogany neck, and a mesmerizing spalted maple veneer, this guitar promises a harmonious blend of tonal richness and visual allure.

Key Features:

• Mahogany / Maple / Spalted Maple 3-Ply Body: Experience the warmth and richness of mahogany, enhanced by the striking visual appeal of spalted maple.
• Mahogany Neck: A mahogany neck adds to the guitar’s resonance and stability.
• Spalted Maple Finish: The flamed maple veneer brings an elegant touch to your instrument’s aesthetics.
• Ebony Fingerboard: Enjoy smooth playability and exceptional tonal response with an ebony fingerboard.
• 628mm (24.75″) Scale Length: This scale length ensures comfortable play and balanced string tension.
• 12″ Radius: The 12-inch radius fingerboard allows for smooth bending and chord transitions.
• Block Pearlized Inlays: These inlays not only look exquisite but also serve as a functional guide for your fingers.
• Bone Nut (42mm): Enhance sustain and resonance with a precisely cut bone nut.
• Non-Soldering Assembly: Assemble your dream guitar without the need for soldering, making it accessible to all skill levels.
• Gold Hardware: Gold fittings add sophistication and durability to your guitar.
• 2 Humbucker Pickups: Enjoy a versatile sonic palette with dual Humbucker pickups, offering a wide range of tones.
• Set-In Neck Joint: The set-in neck joint ensures stability, sustain, and easy access to higher frets.
• Black Pick Guard Included: Protect and enhance your guitar with the included Black pick guard.

Please note that this kit includes basic instructions to simplify the assembly process. For those seeking additional guidance and inspiration, a wealth of assembly techniques can be explored online, with helpful videos available on platforms like YouTube.

Elevate your music journey with a guitar crafted with care and passion. Experience the ES266 Spalted Maple, Left-Handed guitar kit by Coban Guitars. Order now and embark on your musical adventure!”

Explore DIY Electric Guitar Kits by Coban Guitars – ES266 Spalted Maple, Left-Handed

Unleash your musical creativity with the ES266, a left-handed electric guitar kit designed for the discerning musician in you. This exceptional kit boasts a stunning flamed maple finish, paired with a sleek ebony fingerboard, all accentuated by elegant cream fittings. Crafted with a mahogany and maple 3-ply body, a mahogany neck, and a mesmerizing spalted maple veneer, this guitar promises a harmonious blend of tonal richness and visual allure.

Key Features:

• Mahogany / Maple / Spalted Maple 3-Ply Body: Experience the warmth and richness of mahogany, enhanced by the striking visual appeal of spalted maple.
• Mahogany Neck: A mahogany neck adds to the guitar’s resonance and stability.
• Spalted Maple Finish: The flamed maple veneer brings an elegant touch to your instrument’s aesthetics.
• Ebony Fingerboard: Enjoy smooth playability and exceptional tonal response with an ebony fingerboard.
• 628mm (24.75″) Scale Length: This scale length ensures comfortable play and balanced string tension.
• 12″ Radius: The 12-inch radius fingerboard allows for smooth bending and chord transitions.
• Block Pearlized Inlays: These inlays not only look exquisite but also serve as a functional guide for your fingers.
• Bone Nut (42mm): Enhance sustain and resonance with a precisely cut bone nut.
• Non-Soldering Assembly: Assemble your dream guitar without the need for soldering, making it accessible to all skill levels.
• Gold Hardware: Gold fittings add sophistication and durability to your guitar.
• 2 Humbucker Pickups: Enjoy a versatile sonic palette with dual Humbucker pickups, offering a wide range of tones.
• Set-In Neck Joint: The set-in neck joint ensures stability, sustain, and easy access to higher frets.
• Cream Pick Guard Included: Protect and enhance your guitar with the included cream pick guard.

Please note that this kit includes basic instructions to simplify the assembly process. For those seeking additional guidance and inspiration, a wealth of assembly techniques can be explored online, with helpful videos available on platforms like YouTube.

Elevate your music journey with a guitar crafted with care and passion. Experience the ES266 Spalted Maple, Left-Handed guitar kit by Coban Guitars. Order now and embark on your musical adventure!”

• Headstock: Paddle
• Nut: 42mm bone
• Neck: Maple + Skunk stripe
• Fingerboard: Maple
• Inlay: Mother of pearl dot inlay
• Radius: 12″
• Frets: Medium Jumbo, 22
• Scale length: 25.5″/648mm
• Body: Ash 1:1 join in the middle
• Veneer: Spalted maple on top and back
• Hardware: Gold
• Pickguard:Red pearl
• Electronics: Non soldering
• Control: 1V, 1T, 3-Way Selector
• Pickups: S-S-S Hardware:
• Guitar Bridge System Single Tremolo Guitar Pickup Type Passive
• Instructions

• DIY electric guitar kits, ES260 style with basswood back.
• Spalted veneer top
• Mahogany neck,
• Block inlays,
• Ebony Fingerboard (22 frets)
• 24.75″ 628mm
• Bone nut 43mm
• Uncut head.
• Gold Hardware inc Pickup 2 Humbucker Controls: 2V, 2T PU selector: 3-way switch push fit connections
• Holes pre drilled (not shown on photo)
• WITH Cream PICK GUARD
• Neck joint Set in.
• Information Please note that the kit does come with basic instructions please email for details. Most of the work is straightforward assembly, but you may want to research the web for different assembly techniques and check out You tube for videos on the subject.
• This kit contains everything you need to build a complete, playable guitar, except your choice of finish. Call, text or whats app on 07397159810

• DIY electric guitar kits
• LP style Solid Mahogany body with Spalted Maple Veneer
• Ebony fingerboard
• 22 Frets
• 628mm 24.75″
• 12″ Radius
• Wedge Trapezoid Inlays
• Bone nut 43mm
• Uncut head.
• ALL NON SOLDERING
• Chrome fittings (also available in Gold fittings)
• Pickup: 2 *Humbucker Controls: 2V, 2T PU selector: 3-way switch
• Neck joint: Set in
• Inc cream Pick guard.
• Information Please note that the kit does come with basic instructions. Most of the work is straightforward assembly, but you may want to research the web for different assembly techniques and check out youtube for videos on the subject.

• DIY electric guitar kits
• LP710 style Solid Mahogany body with Spalted Maple Veneer
• Ebony fingerboard
• 22 Frets
• 628mm 24.75″
• 12″ Radius
• Uncut head
• Bone Nut 43
• Truss Rod
• Trapezoid Inlays
• ALL NON SOLDERING
• Gold fittings (also available in Chrome fittings)
• Pickup: 2 *Humbucker Controls: 2V, 2T PU selector: 3-way switch
• Neck joint: Set in
• Black Pick guard.
• Information Please note that the kit does come with basic instructions. Most of the work is straightforward assembly, but you may want to research the web for different assembly techniques and check out youtube for videos on the subject.

• Coban Guitars Electric Guitar DIY Kit SG510 Set in Neck Mahogany with Spalted Maple Veneer Hardware Gold with Black Fitting
• SG510
• Mahogany body 1 or 2 part with Spalted Maple Maple Veneered Top
• Mahogany Neck (set-in)
• 22 Frets
• Bone nut width 43mm
• String scale length 628mm
• Ebony Fingerboard
• Wedge inlays
• Pre drilled
• NON SOLDERING
• Gold plated hardware
• 2 x Humbucker style pick ups 2 volume and 2 tone knobs and switch
• Black scratch plate
• Gold bridge
• Gold machine heads
• Lead
• Strap buttons
• All electronics NON SOLDERING
• Instructions
• Information Please note that the kit does come with simple instructions. Most of the work is straightforward assembly, but you may want to research the web for different assembly techniques and check out youtube for videos on the subject.This kit contains everything you need to build a complete, playable guitar, except your choice of finish. Call, text or whats app on 07397159810 or 0845 53 390 53

• NECK AND BODY ONLY
• Coban Guitars DIY Guitar kit PRSBN Spalted Maple Veneer Set in Neck Body and Neck ONLY
• Mahogany Part Arch Top Body with Spalted Maple Veneer
• NO BINDING ON THE EDGE SEE PHOTOS
• Mahogany Neck Uncut (set-in)
• Ebony Fingerboard
• 22 Frets
• 24.75′ scale 628mm
• Bone nut
• White dot fret markers
• Pre drilled
• Truss Rod

• DIY electric guitar kits
• LP710 style Solid Mahogany body with Spalted Maple Veneer
• Ebony fingerboard 628mm 24.75″
• 12″ Radius
• Uncut head
• Bone Nut 43
• Truss Rod
• Trapezoid Inlays
• ALL NON SOLDERING
• Gold fittings (also available in Chrome fittings)
• Pickup: 2 *Humbucker Controls: 2V, 2T PU selector: 3-way switch
• Neck joint: Set in
• Cream Pick guard.
• Information Please note that the kit does come with basic instructions. Most of the work is straightforward assembly, but you may want to research the web for different assembly techniques and check out youtube for videos on the subject.

• DIY electric guitar kits
• LP style Solid Mahogany body with Spalted Maple Veneer
• Bolt-On Neck
• Ebony fingerboard
• 22 Frets
• 628mm 24.75″
• 12″ Radius
• Wedge Trapezoid Inlays
• Bone nut 43mm
• Uncut head.
• ALL NON SOLDERING
• Gold fittings (also available in Chrome fittings)
• Pickup: 2 *Humbucker Controls: 2V, 2T PU selector: 3-way switch
• Neck joint: Bolt on
• Inc Black Pick guard.
• Information Please note that the kit does come with basic instructions. Most of the work is straightforward assembly, but you may want to research the web for different assembly techniques and check out youtube for videos on the subject.